BOLD MAGENTA part numbers are new for 2027 PARTS-UNLIMITED.COM 2027 | SNOW DRIVETRAIN DRIVETRAIN 418 COMET PARTS IDENTIFICATION NOTE: Comet clutch lube and clutch pullers available; see Tools & Hardware section. FOR 100/101/102/108-C/108-EXP/108 4-PRO CLUTCHES ITEM # DESCRIPTION 1 Bolt, mounting 2 Lock washer, mounting bolt 3 Pilot washer, mounting bolt 4 Bolt, cover plate 5 Lock washer, cover plate bolt 6 Cover plate assembly (includes bushing kit) 7 Spring, engagement ITEM # DESCRIPTION 8 Spider 9 Roller w/ bushing insert 10 Washer, steel backed fiber thrust 11 Axle pin, roller 12 Guide button, contoured 13 Spacer, spider 14 Bushing, movable face ITEM # DESCRIPTION 15 Belt spacer 16 Movable sheave 17 Pivot bolt, cam arm 18 Washer, cam arm 19 Cam arm 20 Lock nut, pivot bolt 21 Fixed face and stem assembly1 1 Available as a set only. COMET 100/101/102/108-C/108-EXP/108 4-PRO REPLACEMENT PARTS AND SERVICE KITS DESCRIPTION/DIMENSIONS APPLICATIONS PKG. QTY. PART # BELT SPACERS Belt spacer - Used currently on clutch #s 208302/208303 (1 5/16” belts). Use one between movable sheave and #203150 spacers on 1 3/16” and 1 1/4” belt models for use with 1 5/16” wide belts. 1 5/64” ID x 1 5/8” OD x 1/16” thick. 102-C thru 1987 1 207398 BOLT KITS Bolt kit, mounting - Used currently on clutch #s 208301/208302/214601 plus older clutches for tapered crankshafts. Includes bolt and #205761 lock washer. 1/2”-20 x 7”. 100/101/102/108-C - 208794 BUSHING KITS Bushing kit, cam arm special performance - Currently installed in cam arm #s A-1/2/3/4/5,AA-1/2,AB-1/2, B-1/2/3/5, C-1M/2/2M, F-2, HE-5, K-2, N-1. Kit includes three replacements 0.253” ID x 0.315” OD x 0.45” wide. Use on these cam arms only. 100/1 01/102/108-C. 100/101/102/108-C - 208342 PIVOT BOLTS & LOCK NUTS Pivot bolt kit - Used currently on all models, plus all 102-C HD production (since 1983).Also retrofits all models by replacing the original #205299 pivot pins. Includes three 1/4” x 2 1/4” bolts, nine #207953 lock nuts and six #204203 cam arm thrust washers. 100/101/102/108-C - 207869 ROLLER KITS Roller kit, heavy-duty - Used currently on all 102/108-C models thru 1988 plus all models manufactured in 80-85/87.Also replaces the parts in all 77-79 models w/ 1/16” D buttons (identified w/ the #1GB on the spider). Does not fit 1986 production 102-C models identified w/ the blue paint dot in the spider spring seat area. Includes three pins 3/8” x 1, six #207327 Fibrilex thrust washers with steel backing (three steel were substituted for three of these on older models), six black 1/16” D contoured guide buttons and three 3/8” ID rollers with bushing inserts. 102/108-C 1977-85/87-88 - 207756 SPIDER ASSEMBLIES Spider assy. - 1988 production 102-C heavy-duty spider casting includes all the parts in the Heavy-duty roller kit #207756, above. Retrofits all 100/101/102-C clutches. 100/101/102C thru 1988 - 214917 Spider assy. - 1989 production used on all 1989 102-C clutches, includes the Heavy-Duty Roller Kit #214920. 102-C 1989 - 214917 COMET 94-C DUSTER 25 MM ADAPTER •Use to fit 30 mm Duster drive clutches to old 25 mm crankshafts DESCRIPTION PART # Comet 94-C duster 25 mm adapter 204799 DESCRIPTION PART # Nylon button kit 204332 NYLON BUTTON KIT FOR 90D/100D SECONDARY (DRIVEN) CLUTCHES •Genuine Comet cam slider shoes fit the 1/4” hole in 90D and 100D driven units •Previously sold under PART #203111/203518; six required per clutch; sold in kits of three
RkJQdWJsaXNoZXIy