29 PRO 2.0 Plow leveling kits • Does the machine have tracks, larger tires, higher A-arms, lift kit, or anything that raises the height of the machine from original stock height? • Is the machine lower than stock height or has settled over time? • Unlevel plowing causes strain on the plow system and leads to uneven wearing of the wear bars when the blade is rotated. • By installing the correct KFI leveling kit for your application, the proper blade angle and plowing geometry will be restored. • Specifically designed for use with KFI UTV Tubes #4501-1004 (106300) • DOES NOT work with discontinued KFI UTV Tubes 105635 • Designed to bolt onto your existing tube system. • Constructed of Grade 50 Steel • All Hardware included -1 INCH #106320 8.5” to 9.5” 1OR 2 INCH #106322 12.5” to 14” 11.5” to 12.5” 4 INCH #106324 14” to 16” 6 INCH #106326 16” to 18” MEASURING PIN HEIGHT With the plow mount installed on the machine, measure from the ground to the center of the pin on the plow mount. KFI’s ideal plow pin height is between 9.5” to 11.5”. If the measurement falls below 9.5” or above 11.5”, use the chart below to decide which leveling kit is needed: WITH A LEVELING KIT • Guarantees ideal push tube geometry • Correct blade attack angle • Even wearing on wear bar when blade is rotated • Less strain on plow system WITHOUT A LEVELING KIT If the push tubes are not level to the ground it will cause: • Incorrect blade attack angle • Uneven wearing on wear bars when blade is rotated • Added strain to plow system GROUND GROUND NOT LEVEL TO GROUND LEVEL TO GROUND No. 4501-1174 (106320) -1” SQ Push Tube Leveling Kit No. 4501-1007 (106322) +2” SQ Push Tube Leveling Kit No. 4501-1008 (106324) +4” SQ Push Tube Leveling Kit No. 4501-1009 (106326) +6” SQ Push Tube Leveling Kit No. 4501-1223 (106340) +2” SQ Push Tube Forward Kit #4501-1174 (106320) #4501-1007 (106322) #4501-1008 (106324) #4501-1009 (106326)
RkJQdWJsaXNoZXIy OTcxOTk3