BOLD MAGENTA part numbers are new for 2025 ELECTRICAL PARTS-UNLIMITED.COM ATV/UTV | 2025 ELECTRICAL 1493 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. KILL SWITCH HOW TO ORDER NOTICE TO CUSTOMERS: There are two types of stop switches: (1) Normally Open, (NO) or (2) Normally Closed, (NC). Switches in this catalog are typically of the Normally Open (NO) type.They work by GROUNDING the primary ignition lead when activated. Note that they will not work on electrical systems requiring a Normally Closed (NC) switch, which works by OPENING the circuit when activated. NC switches are typically used on battery type ignitions, which may have an ignition key as an identifier. NC switches are generally found on newer machines. If in doubt, check your machine’s wiring schematic. DESCRIPTION PART # Universal toggle on/off switch 0616-0155 UNIVERSAL TOGGLE ON/OFF SWITCH •Universal for both ATV and bikes •Switch can be used for almost any accessory • Switch specs: wire length 20”; width 22 mm DESCRIPTION PART # Universal on/off flat mount toggle switch 0616-0233 UNIVERSAL ON/OFF FLAT MOUNT TOGGLE SWITCH •For use with almost any accessory • Similar to PART #0606-0155, but designed for convenient flat mount to dash or interior panels •Complete with wiring accessories and double-stick adhesive tape for mounting • 20” wire length; switch width 22 mm DESCRIPTION PART # Universal off-road switch 0616-0158 UNIVERSAL OFF-ROAD SWITCH •Has 9-pin connector • Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator •Switch specs: 28.5 mm wide housing, wire length is 21.5” DESCRIPTION PART # Dual horn 2107-0230 DESCRIPTION PART # Horn button 2107-0247 DUAL HORN •Loud two-horn set •Dual tone – high and low •Zinc-plated to avoid corrosion •Consistent sound •Protective grille over bell to keep mud and debris out •Easy to install; mounting brackets included •Horn button with wires available separately DESCRIPTION PART # Horn kit w/ dash-mounted switch 2107-0273 Horn kit w/ handlebar-mounted switch 2107-0274 ELECTRIC HORN KITS •Includes two super-loud 118 dB electric horns •Universal fitment with 12V system •All wiring and easy-to-follow instructions included DESCRIPTION PART # Electromagnetic dual horn kit 2107-0333 ELECTROMAGNETIC DUAL HORN KIT •Has dual 109 dB (at 2 meters) low- and high-tone electromagnetic MARCO horns • Kit includes two horns, mounting bracket, wire harness, relay and on/off momentary rocker switch •Connects directly to the battery for easy installation •For use with 12V electrical systems DESCRIPTION PART # Snail type 2107-0307 UNIVERSAL HORN •Universal for street and offroad use •Emits a loud 105 to 118 dB signal •80 mm diameter and only 7.5 oz •Wire extension included DESCRIPTION PART # Back-up alarm 2107-0229 BACK-UP ALARM •Beeps when vehicle is in reverse •Easy installation and mounting • Small, space-saving design 2107-0274 2107-0230 2107-0247
RkJQdWJsaXNoZXIy OTcxOTk3