dragspecialties.com All part numbers in BLUE are new for 2025. SECTION 7 WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 786 See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. PART # DESCRIPTION VITON® SEALS 0926-2971 For 17-24 M-Eight (4 pk.); repl. OEM #18100044 0926-3027 For 17-24 M-Eight (8 pk.); repl. OEM #18100044 0935-0458 For 05-17 88”/96”/103” Twin Cam and 04-22 XL (except RH Sportster); repl. OEM #18094-02A 0926-3204 For 99-04 Twin Cam, 86-03 XL (for use with 0.420” guides) PART # DESCRIPTION VITON® SEALS (CONT) 0926-2970 For 99-04 Twin Cam, 86-03 XL, 95-02 Buell (for use with 0.530” guide top) PTFE SEALS 0926-0327 For 99-04 Twin Cam, 86-03 XL, 95-02 Buell; repl. OEM #18001-83B PREMIUM VALVE SEALS •Solid Viton® and solid PTFE seals utilize choker spring and lower tension spring to maintain optimal seal under high heat/stress conditions •For use with stock intake and exhaust valve guides, except where noted •Sold in packages of four, unless noted •Made in the U.S.A. 0926-0327 0935-0458 0926-3027 PART # DESCRIPTION 0926-2041 For 99-04 Twin Cam, 86-03 XL; repl. OEM #18001-83B VALVE GUIDE SEALS •Stem diameter 5/16”; guide OD 0.420” •Sold in packs of 4 •Made in the U.S.A. PART # DESCRIPTION OD ID HEIGHT FOR 99-17 TWIN CAM, 03-06 BUELL 0926-0322 Intake 1.9690” 1.535” 0.453” 0926-0323 Intake 2.0070” 1.562” 0.450” 0926-0324 Intake 2.1320” 1.690” 0.450” 0926-0325 Exhaust 1.7570” 1.375” 0.450” POWDERED METAL VALVE SEATS •Tests have proven that the machinability, wear and thermal conductivity surpasses all standards •Compatible with all fuel blends •Sold each •Made in the U.S.A. NOTE: Not for 110” Big Twin motors. 0926-0322 PART # DESCRIPTION OD ID THICKNESS FOR 17-24 M-EIGHT 0926-3355 Intake 1.732” 1.410” 0.430” 0926-3351 Exhaust 1.378” 1.024” 0.434” 0926-3357 O/S Intake 1.757” 1.371” 0.315” 0926-3352 O/S Exhaust 1.417” 1.023” 0.354” 0926-3356 Intake/exhaust 1.752” 1.417” 0.354” 0926-3353 Intake/exhaust 1.457” 1.102” 0.354” FOR 99-17 TWIN CAM, 86-21 XL (EXCEPT RH SPORTSTER) (MACHINING REQUIRED) 0926-3358 Intake/exhaust 1.757” 1.410” 0.430” 0926-3359 Intake/exhaust 1.882” 1.530” 0.410” 0926-3361 Intake/exhaust 2.008” 1.610” 0.440” 0926-3362 Intake/exhaust 2.040” 1.700” 0.425” 0926-3364 Intake/exhaust 2.070” 1.610” 0.450” 0926-3365 Intake/exhaust 2.132” 1.800” 0.460” HIGH CHROME VALVE SEATS •Seats contain 18 to 22% Chromium for resistance to abrasion, corrosion and deformation •Nickel content of 1 to 2% for added corrosion resistance and toughness •Machined from solid bar stock and ground to exact tolerances •Machines as a continuous chip •Ideal alternative to powder metal valve seats •Sold each •Made in the U.S.A. 0926-3351
RkJQdWJsaXNoZXIy OTcxOTk3