dragspecialties.com All part numbers in BLUE are new for 2025. SECTION 17 WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 1730 See OLDBOOK For Early Model Applications PART # DESCRIPTION CHROME 0401-0073 -2” 0401-0074 Std. length 0401-0075 +2” 0401-0076 +4” 0401-0118 +6” PART # DESCRIPTION BLACK 0401-0078 -2” 0401-0079 Std. length 0401-0080 +2” 0401-0081 +4” 0401-0119 +6” FOR 99-17 BIG TWIN AND 86-03 XL (EXCEPT DRESSER AND DYNA) CUSTOM SPRINGER FORKS •Economical alternative to a shock dampened-type Springer •Fully assembled with an in-line top bracket without a built-in rake •The standard length Springer (31” measured from top bearing to the axle) is comparable to a standard-length FXST front end •1” OD steering stem designed for Timken® type bearings •Both rear legs are threaded for right or left brakes •The 3/4” OD axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used) •Measures 9 1/4” between Rockers •Riser mounts are on 4 3/4” centers and threaded 1/2”-20 •Requires wheel compatible with 3/4” OD axle •These Springers are measured from the bottom of the top tree to the center of the axle NOTE: Do not accept spotlight bars; no fender mounts. PART # DESCRIPTION 0408-0359 For 14-24 FLHT/FLHX/FLHR 0408-0360 For 14-24 FLTRX/FLTRU/FLTRK PART # DESCRIPTION 0408-0357 For 09-13 FLHT/FLHX/FLHR 0408-0358 For 09-13 FLTR/FLTRX/FLTRU PART # DESCRIPTION 0408-0355 For 99-08 FLHT/FLHR/FLHX X-26® BOLT-ON NECK RAKE KITS FOR 26” WHEELS •Manufactured from 6061-T6 billet aluminum and 4150 high-strength steel alloy •Bolt-on for 26” wheel installation •Secure attachment and unmatched strength •Proven press fit technology •Compatible with factory suspensions using stock clearances •Exceptional frame clearance, handling and stability •Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes. 0408-0360 0408-0355 PART # DESCRIPTION 0408-0447 For 23-24 FLHXSE/FLTRXSE w/ 62 mm inverted fork 0408-0448 For 24 FLHX/FLTRX w/ 49 mm conventional fork X-23 7° BOLT-ON TRIPLE TREES •Features HHI’s Direct Bolt-On installation, with no modifications necessary •Positions front wheel forward approximately 2” •Headlight angle can be adjusted without the use of a raked headlight bezel kit •Uses stock-length fork covers, and does not require fork extensions •Includes fork travel limiters to prevent fender interference •7° triple tree rake results in stock trail geometry •Responsive and stable handling •Performs as well as or better than stock •Stock fork lock fully functional •For use with 23” x 130 mm or 21” x 180 mm wheel/tire installation •Made in the U.S.A. NOTE: Hawg Halters recommends rear wheel size to remain stock of 16 x 5.5 or upgraded to 18 x 5.5 wheel with a properly load rated 180 mm tire. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes. 0401-0081 0401-0076 0408-0447 0408-0448
RkJQdWJsaXNoZXIy OTcxOTk3