dragspecialties.com All part numbers in BLUE are new for 2025. SECTION 15 WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 1626 See OLDBOOK For Early Model Applications BUELL FUEL VALVE ADAPTER •Allows the mounting of any 22 mm Pingel fuel valve on Buell models •Bolts in place of the stock fuel valve •A must for modified motors that need a higher-flow-rate fuel valve •Fuel valve must be purchased separately •Made in the U.S.A. TANK FITTING KITS FOR FUEL-INJECTION TO CARBURETOR CONVERSION •Use when converting from OEM fuel-injection systems to a carburetor in order to deliver adequate fuel for large-displacement engines •Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor •Made of stainless steel •Kit includes adapter and plug or adapter only with O-rings or gaskets •Requires Pingel fuel valves due to tight tolerances in tank fittings (see pages 1622-1624; sold separately) •Made in the U.S.A. PETCOCK BUNGS •Weld-on tank bungs are available in 22 mm male (stock on H-D carbureted fuel tanks after 1975) or 3/8” NPT female (stock on pre-1975 H-D fuel tanks) •Designed to be welded directly to the fuel tank •Great for custom tanks or repairing stock tanks •Sold each •Made in the U.S.A. WELDLESS TANK BUNG •Use when an alternative fuel source is needed, like when installing a nitrous oxide “wet” kit on fuel-injected motorcycles or as a fitting for an oil tank •Requires a 9/16” hole for mounting; will work with any tank up to 5/8” wall thickness •1/8” NPT internal thread size for hose barb •CNC machined from billet aluminum; includes a high-quality Viton® O-ring for a positive seal, a stainless steel nut and washer and an 80-micron filter •Made in the U.S.A. FUEL TANK OUTLET PLUG •Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter •Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use •Includes O-ring seal •Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM #62842-00 (Drag PART #0705-0024) PETCOCK ADAPTER •Allows the use of a 22 mm petcock in a fuel tank designed for Delphi fuel injection •Original equipment in 01-06 FXSTD, 03-06 Dresser and 04-06 Softail carbureted bikes •Includes O-ring for a leak-proof seal •Accepts any petcock that installs using a 22 mm nut PART # DESCRIPTION 0705-0027 For all 95-02 Buell models (except fuel-injected models) PART # DESCRIPTION 0705-0031 For 01-03 models w/ Delphi EFI (adapter and plug); for use w/ any Pingel 22 mm valve 0705-0055 For 00-23 models w/ Delphi EFI (adapter only); for use w/ any Pingel 22 mm valve (repl. OEM #62842-00) 0705-0030 For 99-01 FLT/FLHT w/ Magneti Marelli EFI (adapter and plug); for use w/ any Pingel 22 mm valve 0705-0097 For 07-22 XL (except RH Sportsters); for use w/ any Pingel 1/4” NPT valve PART # DESCRIPTION 3/8” NPT 0705-0040 Aluminum 0705-0039 Stainless steel PART # DESCRIPTION 22 MM 0705-0035 Aluminum 0705-0034 Stainless steel PART # DESCRIPTION 0705-0043 Weldless tank bung PART # DESCRIPTION 0705-0054 Polished chrome PART # DESCRIPTION 0705-0024 Chrome-plated; repl. OEM #62842-00 0705-0034 0705-0039 0705-0035 0705-0040 0705-0055 0705-0030 0705-0097
RkJQdWJsaXNoZXIy OTcxOTk3