dragspecialties.com All part numbers in BLUE are new for 2025. SECTION 12 WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 1284 See OLDBOOK For Early Model Applications NOTE HANDLEBARS LISTED WILL NOT ACCEPT H-D OEM HEATED GRIPS (EXCEPT AS NOTED). PART # DESCRIPTION END RISE WIDTH PULLBACK FOR 08-13 FLHT/FLHR/FLHX/F LTR, H-D FL TRIKE, 08-20 FLHR (EXCEPT FLHRXS) AND 16-17 FLSTC/FLSTN/FLS 0601-2754 Chrome 5” 38” 13” 0601-2755 Black 5” 38” 13” PART # DESCRIPTION END RISE WIDTH PULLBACK FOR 99-07 FLT/FLHT/FLHR/FLHX AND 00-15 FLSTC/FLSTN/FLS 0601-1254 Chrome 5” 38” 13” 0601-1255 Black 5” 38” 13” 1 1/4” BIG JOHNSON FL HANDLEBARS •Improves the rider’s overall body position •Provide a more comfortable ride, are easier to steer and make the bike feel 200 lbs. lighter •Will work with all stock cables, lines and controls •Are a direct replacement for stock bars with a 1” riser clamp diameter •Reduced reach and improved back position are provided by the 13” pullback •A lower grip point helps relax the shoulders for added comfort •An improved bar length helps increase the leverage, which makes the bike easier to steer •Reduced or eliminated hand numbness comes from the realigned wrist position •PART #s 0601-2754 and 0601-2755 are dimpled and drilled for internal/external wiring CHROME PART # BLACK PART # STAINLESS PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX, 23-24 FLTRXSE 0601-6625 0601-6626 0601-6627 4” 31” 5 3/4” 2” CHROME PART # BLACK PART # STAINLESS PART # END RISE WIDTH CENTER WIDTH PULLBACK UNIVERSAL 0601-5914 0601-5915 0601-5916 4” 31” 5 3/4” 2” 1 1/4” VALLEY HANDLEBARS •Modeled after MX bars to give your bike a tough look •Steel bars feature a 1 1/4” clamping area •Universal bars will require risers and clamp that accept 1 1/4” handlebars with 1 1/4”clamping area •Top of the bar is mitered CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-0611 - - Road King 4 3/4” 34” 10” 12 1/2” 0601-0612 0601-1482 - Beach bar 2 7/8” 36” 8 1/2” 14 3/4” 0601-0613 - - Drag bar - 30 1/2” 8” 6 1/4” 0601-0614 - - Knuckle bar 2 3/8” 36 1/2” 9” 8” 0601-1860 0601-1951 0601-3456 Superbar 3” 33” 5.5” 6” 0601-0618 - - 10” Ape Hanger 11” 38” 9 1/2” 10” 0601-0619 0601-1483 - 12.5” Ape Hanger 11 3/4” 36 1/2” 10” 12” 0601-0875 0601-1484 - 14” Ape Hanger 14” 39 1/2” 10 1/2” 10 1/2” 0601-0620 0601-1485 - 16” Ape Hanger 16 1/2” 39 1/2” 10 1/2” 10 1/2” 0601-0876 0601-1486 - 18” Ape Hanger 18” 36” 10 1/2” 10 1/2” HEFTY 1 1/4” HANDLEBARS •Handlebars have a 1 1/4” diameter in the clamping area and will require the use of special risers; sold separately, see pages 1338-1357 •All bars are dimpled and drilled for internal wiring •Notched for Throttle-By-Wire •Tapered for clearance of master cylinders and hydraulic clutch assemblies •Will not interfere with stock mirrors •1” clamping area •Made in the U.S.A. •Bars are sleeved down to accept 1” controls •Universal bars are slotted for internal wiring and Throttle-By-Wire •Made in the U.S.A. NOTE: Universal handlebars accept H-D OEM heated grips. •Non-Ape Hanger-style bars will fit with most stock cables; check before installing •Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-0611 0601-0613 0601-0614 0601-0618 0601-1482 0601-3456 0601-1254 0601-2755 0601-6626 0601-5914
RkJQdWJsaXNoZXIy OTcxOTk3