BOLD MAGENTA part numbers are new for 2025 PARTS-UNLIMITED.COM 2025 | TIRE & SERVICE CHEMICALS & LUBRICANTS CHEMICALS & LUBRICANTS 728 RBF700 FACTORY LINE DOT 4 BRAKE FLUID •Perfectly neutral with seals used in braking systems •Provides better aerodynamic performance by reducing air entrance for brake cooling • Mixable with DOT 3, DOT 4 and DOT 5.1 non-silicone base products • Specially designed for ESP,ABS and ASR •High dry boiling point 637 °F (336 °C) •Wet boiling point 401 °F (205 °C) WARNING: Do not mix with DOT 5 or mineral base brake fluids. RBF600 DOT 4 RACING BRAKE FLUID •100% synthetic brake fluid for brake and clutch systems •Retains initial properties longer than DOT 3 or 4 fluids •Boiling point of 594 °F •Compatible with all SAE J1703, DOT 3 and 4 fluids • 500 ml bottle, 12 per case; sold each DESCRIPTION PART # RBF700 Factory Line brake fluid 3703-0073 DESCRIPTION PART # RBF600 racing brake fluid MOT57 MOTOCOOL EXPERT ANTIFREEZE •Ready-to-use antifreeze/coolant •Monoethylene glycol-based •Exceptional protection from freezing -35 °F (-37 °C) •High boiling point 275 °F (135 °C) •Can be mixed with any monoethylene glycol product • Available in one-quart (946 ml) bottle, sold each CHAIN PASTE •Lubricating paste for road bikes •Brush applicator tip •Reduces friction and wear •Decreases power losses and protects against corrosion • 150 ml tube, 12 per case; sold each DOT 5.1 BRAKE FLUID •Synthetic fluid for hydraulic braking systems •Complies with DOT 5.1 for street use •High boiling point; very stable over time •1/2-liter bottle, 12 per case; sold each WARNING: Do not mix with DOT 5 brake fluid. CHAIN CLEAN •Degreases chains and removes encrusted deposits of grease, sand and dirt • Chlorine-free • 9.8 oz. can DESCRIPTION PART # Motocool Expert antifreeze 3705-0038 DESCRIPTION PART # Chain paste 3605-0042 DESCRIPTION PART # DOT 5.1 brake fluid MOT10 DESCRIPTION PART # Chain clean 3704-0169 RBF660 FACTORY LINE DOT 4 BRAKE FLUID •High-performance brake fluid with dry boiling point of 617 °F (325 °C) and wet boiling point of 400 °F (204 °C) •For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid •Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling •Comes in half-liter bottle DESCRIPTION PART # RBF660 Factory Line brake fluid 3703-0049
RkJQdWJsaXNoZXIy OTcxOTk3