BOLD MAGENTA part numbers are new for 2025 V-TWIN TOOLS DRAGSPECIALTIES.COM TIRE & SERVICE | 2025 689 COMPLETE O2 BUNG INSTALLATION KIT • Kit to add 18 mm x 1.5” threaded bungs for O2 sensors and O2 tuning samplers • Remove heat shields, install bung and tune; when completed, use included screw and copper washer to seal bung and then replace heat shield for unaltered finish •No pump or sampling tube required and allows both cylinders to easily be monitored at the same time •No welding • Includes one hydraulic insertion tool, one drill bit, two O2 sampler blocks, tubing, 25 Rivnuts, 25 screws and 25 copper washers, all contained in plastic case •Refill kit PART #3807-0398 includes 25 each of bungs, plugs and copper washers, sold separately •Made in the U.S.A. TWIN SCAN COMPLETE KIT •Complete tuning and diagnostic solution • Includes Twin Scan II ABS for 01-14 models with J1850 data bus,Twin Scan 4 for 11-19 CAN data bus with 6-position DLC connector,WEGO IIID for tuning capability with both Twin Scan versions, and the Twin Scan 3 Probe Kit for use with the scopemeter feature of the Twin Scan •Communicates with ECM and BCM to read, then clear diagnostic trouble codes •Activates ABS solenoids for proper brake bleeding and testing • Ideal tuning aid for Screamin’ Eagle Pro Super Tuner (SEST), Dynojet Power Commander (PC) and Twin Tec Twin Tuner • Includes all features of the standard Twin Scan units •Real-time display of engine sensors along with built-in data logging with capability to store data for up to one hour • Included PC software analyzes logged data, then displays front and rear cylinder AFR with the required volumetric efficiency (VE) using the same RPM rows and TPS/MAP columns used in the Super Tuner tables PART # DESCRIPTION 3807-0378 Complete O2 bung installation kit PART # DESCRIPTION 3807-0398 Refill kit PART # DESCRIPTION 3807-0446 For 11-19 CAN bus with 6-pos DLC connector, 01-14 36-pin Delphi fuel-injected and 04-06 carbureted models w/ 12-pin module •Includes two analog inputs with 0-20V or ±200V range as well as two-channel oscilloscope capability for waveform display •Analog inputs can also be used for air/flow ratio (AFR) • Requires use of a PC with Windows 7,Windows 8, Windows 10 or Windows 11 for display • Includes two Bosch LSU 4.2 wide-band oxygen sensors, two 18 mm x 1.5 weld nuts, two 18 mm x 1.5 hex socket plugs, USB cable,Twin Scan 3 probe kit and CD-ROM with software •Made in the U.S.A. NOTE: See page 633 of 2025 Drag Specialties FatBook for replacement weld nuts to mount O2 sensors. 3807-0378
RkJQdWJsaXNoZXIy OTcxOTk3