VISIT WWW.MOOSERACING.COM FOR MORE OFF-ROAD CONTENT GARAGE & PROMO OIL FILTER PULLER $13.95 ° Easy removal of oil filters that are recessed and difficult to remove ° Simply drive sheet metal screw end into the oil filter housing and extract filter without damage to the case ° Not for use with SS reusable filters OIL FILTER PULLER 3801-0363 CHAIN BREAKER TOOL $40.95 ° For use from 428 to 530 chain sizes. ° Compact design has folding handle that provides additional leverage when pressing out pins from chain side plates. ° Maximum pin extension is 18mm for driving pins out from width of chain link. ° Replaceable pin is available and heat treated for added strength and wear resistance CHAIN BREAKER TOOL 3806-0086 CLUTCH/ BRAKE BLEEDER TOOL $18.95 ° Simply attach the syringe to the bleeder bolt then open and apply slight pressure pushing fluid up into the reservoir ° This can also be used to extract specific amounts of fluid from fork leg or any other reservoir ° Simple easy way to push fluid through line without adding air bubbles into line CLUTCH/ BRAKE BLEEDER TOOL 3808-0018 SNAP RING TOOL $27.95 ° Removal of internal snap rings used on hydraulic mater cylinders ° Right angle allows up to 50mm deep in reach ° Can be used on fork seal retaining rings also SNAP RING TOOL 3808-0019 CABLE LUBER $11.95 ° Allows a solid seal to the cable without having to remove from lever and perch. ° Inject lube into the housing forcing lube into the cable and forcing through cable until it runs out opposite end of cable ° Small compact size allows to be carried in fanny pack or small tool pack for on trail use CABLE LUBER 3850-0487 HD SPRING PULLER TOOL $18.95 ° Its heavy duty handle provides extra leverage for pulling off stiff pipe springs. ° Larger handle allows for better grip and longer hook area to get into hard to reach areas HD SPRING PULLER TOOL 3850-0486 TRACK BOX REPLACEMENT HARDWARE KITS $19.95 - $23.95 ° Two styles of replacement bolt kits specifically for KTM or Japanese dirt bikes ° KTM hardware is Dacromet® plated, 8.8 grade, and has dimpled heads like stock ° Japanese kit contains nickelplated bolts selected to replace commonly lost hardware ° Less expensive than OEM and priceless when you really need it ° Keep a box in your toolbox, riding pack and gear bag for those critical moments ° Made in the USA DESCRIPTION PART # 48-PIECE KTM HARDWARE 2401-1519 54-PIECE JAPANESE HARDWARE 2401-1520 370
RkJQdWJsaXNoZXIy OTcxOTk3