dragspecialties.com SECTION 7 All part numbers in BLUE are new for 2024. WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 767 See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. PART # DESCRIPTION SUG. RETAIL FOR 17-23 M-EIGHT 0926-3434 -0.050” installed height $219.95 0926-3435 +0.050” installed height 229.95 FOR 99-04 TWIN CAM, 86-03 XL, 95-02 BUELL 0926-2265 Screamin Eagle performance BEEHIVE valve-springs with .725” top ID 139.95 TITANIUM VALVE SPRING RETAINER KITS •PART #0926-3434 decreases installed valve spring height to help reduce the amount of shims needed to properly setup valve springs for cam lift (fits stock M-Eight valve springs and PART #0926-2973) •PART #0926-3435 increases valve spring installed height without the need for removing/cutting valve spring seat pockets/depths (fits M-Eight OEM, SE valve springs and PART #s 0926-2973 and #0926-3138) •PART #0926-2265 allows installation of the Screamin Eagle performance BEEHIVE valve springs with .725” top ID onto the early style 5/16” valve stem cylinder heads and includes retainers, standard height steel keepers, machined steel spring seats and Viton® valve seals for factory guides •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-199555 For all 99-04 Twin Cam and 86-03 XL that use a 10° lock angle and 5/16” valve stems $27.95 VALVE LOCK KEYS •Made from the highest-grade materials and heat-treated to JIMS strict standards •Feature a 10° lock angle •Work well with JIMS titanium valve spring retainers •Sold in 8-pack •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 17-23 M-EIGHT 0926-2976 Steel valve locks standard height for 6mm valve stems $59.95 FOR 05-17 88”/96”/103” TWIN CAM AND 04-22 XL (EXCEPT RH SPORTSTER) (7MM VALVE STEMS) 0926-1171 Steel valve locks standard height for 7mm valve stems; repl. OEM #18260-02 29.95 FOR 99-04 TWIN CAM AND 86-03 XL (5/16” VALVE STEMS) 0926-3368 Steel valve locks standard height groove 5/16” valve stems, 7° w/ square groove; repl. OEM #18229-83 29.95 0926-1170 Offset 10° for 5/16” valve stems; raise valve spring retainer to gain 0.050” of valve spring installed height (also fits Feuling High Load Beehive valve springs) 29.95 VALVE LOCK KEYS •A selection of high-quality machined valve locks available in stock replacement, offset or triple-groove •Offset locks raise retainer to gain .050” installed height •Titanium locks are offset 10° •Made in the U.S.A. PART # TYPE SUG. RETAIL FOR 17-22 M-EIGHT 0926-2969 Standard; repl. OEM #18100060 $66.95 FOR 99-04 TWIN CAM, 86-03 XL 0926-0776 15° replacements for KPMI dual spring kits 33.95 0926-0777 Standard; repl. OEM #18229-83 17.95 VALVE KEYS •Made of steel •Sold in eight-pack •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL (EA.) 0926-1092 For 05-17 88”/96”/103” Twin Cam, 04-22 XL models (except RH Sportster models); repl. OEM #18260-02 $1.95 VALVE KEYS •High-grade steel construction •Sold in 4-pack •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0930-0155 For 17-23 M-Eight $18.95 0930-0237 For 99-17 Twin Cam and 86-17 XL 16.95 VALVE SPRING SEAT SHIMS •Set valve spring open height to match camshaft lifts for optimum valve-train stability and performance •PART #0930-0155 includes eight 0.060” thick shims, eight 0.030” thick shims and eight 0.015” thick shims with 1.200” OD (outside diameter) and 0.570” ID (inside diameter) •PART #0930-0237 includes four 0.060” thick shims and four 0.015” thick shims with 1.500” OD (outside diameter) and 0.645” ID (inside diameter) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0930-0138 .030” valve spring shim $6.95 VALVE SPRING SHIM •.574” x 1.450” x .030” •Black, steel construction •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0926-1439 For 99-04 Twin Cam, 86-03 XL $94.95 VALVE SPRING UPPER COLLARS •Provide .050” more spring travel than stock •Stronger and lighter than stock •Use stock keepers •Sold as set of four •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL (EA.) 0926-2316 For 05-17 88”/96”/103” Twin Cam; repl. OEM #18258-02 $4.95 VALVE SPRING UPPER COLLARS •OEM-quality replacement •Sold in 4-pack •Made in the U.S.A. 0926-3434 0926-2265 0926-1170 0926-0776 0930-0237
RkJQdWJsaXNoZXIy OTcxOTk3