dragspecialties.com SECTION 15 All part numbers in BLUE are new for 2024. WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 1605 See OLDBOOK For Early Model Applications PART # DESCRIPTION SUG. RETAIL 0705-0027 For all 95-02 Buell models, except fuel-injected models $57.95 BUELL FUEL VALVE ADAPTER •Allows the mounting of any 22mm Pingel® fuel valve on Buell models •Bolts in place of the stock fuel valve •A must for modified motors that need a higher-flow-rate fuel valve •Fuel valve must be purchased separately •Made in the U.S.A. TANK FITTING KITS FOR FUEL-INJECTION TO CARBURETOR CONVERSION •Use when converting from OEM fuel-injection systems to a carburetor in order to deliver adequate fuel for large-displacement engines •Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor •Made of stainless steel •Kit includes adapter and plug or adapter only with O-rings or gaskets •See Pingel fuel valves on pages 1601-1603 •Made in the U.S.A. NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve is required. PART # DESCRIPTION SUG. RETAIL 0705-0031 For 01-03 models w/ Delphi EFI (adapter and plug); for use w/ any Pingel 22mm valve $69.95 0705-0055 For 00-23 models w/ Delphi EFI (adapter only); for use w/ any Pingel 22mm valve; repl. OEM #62842-00 40.95 0705-0030 For 99-01 FLT/FLHT models w/ Magneti Marelli EFI (adapter and plug); for use w/ any Pingel 22mm valve 69.95 0705-0097 For 07-22 XL models (except RH Sportsters); for use w/ any Pingel 1/4” NPT valve 95.95 PETCOCK BUNGS •Weld-on tank bungs are available in 22mm male (stock on Harley-Davidson carbureted fuel tanks after 1975) or 3/8” NPT female (stock on pre-1975 Harley-Davidson fuel tanks) •Designed to be welded directly to the fuel tank •Great for custom tanks or repairing stock tanks •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3/8” NPT 0705-0039 Stainless steel $19.95 0705-0040 Aluminum 21.95 PART # DESCRIPTION SUG. RETAIL 22MM 0705-0034 Stainless steel $19.95 0705-0035 Aluminum 21.95 PART # DESCRIPTION SUG. RETAIL 0705-0043 Weldless tank bung $62.95 WELDLESS TANK BUNG •Use when an alternative fuel source is needed, like when installing a nitrous oxide “wet” kit on fuel-injected motorcycles or as a fitting for an oil tank •Requires a 9/16” hole for mounting; will work with any tank up to 5/8” wall thickness •1/8” NPT internal thread size for hose barb •CNC-machined from billet aluminum; includes a high-quality Viton® O-ring for a positive seal, a stainless steel nut and washer and an 80 micron filter •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0705-0024 Chrome-plated; repl. OEM #62842-00 $22.95 PETCOCK ADAPTER •Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection •Original equipment in 01-06 FXSTD, 03-06 Dressers and 04-06 Softail carbureted bikes •Includes O-ring for a leak-proof seal •Accepts any petcock that installs using a 22mm nut FUEL TANK OUTLET PLUG •Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter •Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use •Includes O-ring seal •Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM #62842-00 (Drag PART #0705-0024) PART # DESCRIPTION SUG. RETAIL 0705-0054 Polished chrome $19.95 0705-0034 0705-0035 0705-0039 0705-0040 0705-0097 0705-0097 0705-0030 0705-0097 0705-0030 0705-0055
RkJQdWJsaXNoZXIy OTcxOTk3