dragspecialties.com All part numbers in BLUE are new for 2024. SECTION 12 WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES 1248 See OLDBOOK For Early Model Applications NOTE HANDLEBARS LISTED WILL NOT ACCEPT H-D OEM HEATED GRIPS (EXCEPT AS NOTED). 1 1/4” TWIN ROUND HANDLEBARS •Classic ape hangers with the same dimensions as the popular Twin Peaks handlebars •Available in heights from 8” up to 16” •3 1/2” on-center knurling, 1” clamping area •Bar includes new black control clamps to replace the oversize OEM clamps; unless noted •Notched for TBW applications •Available in chrome and gloss black finishes •Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 1 1/4” HEFTY TWIN PEAKS HANDLEBARS •Features 1 1/4” diameter in the clamping area •Works with the OEM riser and clamps; has the correct wire exit location •Bar includes new black control clamps to replace the oversize OEM clamps; unless noted •Does not need to remove the stock pin in the OEM mount clamps; bar still has more than 35° of adjustment •Knurled clamping area •Will work with hydraulic clutches •Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 1 1/4” MOOSE KNUCKLE HANDLEBARS •Feature extra pullback for a more relaxed riding position •Handlebars are stepped down to 1” diameter in the clamping area •Notched for Throttle-By-Wire applications •Drilled for internal wiring •3 1/2” on-center knurled clamping area 1 1/4” MOOSE KNUCKLE TOURING HANDLEBARS •Feature extra pullback for a more relaxed riding position •Measure 1 1/4” diameter in the clamping area; will work with the OEM riser and clamp •Notched for Throttle-By-Wire applications •Drilled for internal wiring •Bars include black control clamps to replace the oversize OEM clamps •Do not need to remove the stock pin in the OEM mount clamps; bars still have more than 35° degrees of adjustment •Will work with hydraulic clutches •Made in the U.S.A. NOTE: Accept H-D OEM heated grips. •Knurled clamping area •Will work with hydraulic clutches •Made in the U.S.A. NOTE: Accept H-D OEM heated grips. CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/S/ST, FLTRU/FLTRK MODELS 0601-6216 $325.95 0601-6217 $279.95 8” 33 1/2” 9.4” 6” 0601-6218 325.95 0601-6219 279.95 10” 33 7/8” 9.4” 6” 0601-6220 325.95 0601-6221 279.95 12” 34 1/8” 9.4” 6” 0601-6222 325.95 0601-6223 279.95 14” 34 5/8” 9.4” 6” 0601-6224 325.95 0601-6225 279.95 16” 35 1/8” 9.4” 6” FOR 99-23 FLHT, FLHX, FLHTCUTG/FLHXXX MODELS 0601-62281 355.95 0601-62291 309.95 10” 37 1/3” 12” 5” 0601-62301 355.95 0601-62311 309.95 12” 37 1/3” 12” 5” 0601-62321 355.95 0601-62331 309.95 14” 37 1/3” 12” 5” 0601-62341 355.95 0601-62351 309.95 16” 37 1/3” 12” 5” 1 Does NOT include black OEM replacement control clamps. CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL FLAT BLACK PART # SUG. RETAIL STAINLESS STEEL PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/S/ST, FLTRU/FLTRK MODELS 0601-3838 $404.95 0601-3839 $387.95 0601-4047 $387.95 - - 10” 34” 9” 6” 0601-3840 404.95 0601-3841 387.95 0601-4048 516.95 0601-5408 $441.95 13” 34” 9” 6” 0601-3842 404.95 0601-3843 387.95 0601-4049 387.95 0601-5409 441.95 16” 34” 9” 6” 0601-3844 404.95 0601-3845 387.95 0601-4050 387.95 - - 19” 34” 9” 6” CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK 0601-3846 $308.95 0601-3847 $274.95 8” 35” 9” 11” CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/S/ST, FLTRU/FLTRK MODELS 0601-3848 $334.95 0601-3849 $301.95 8” 35” 9” 11” 0601-3840 0601-3843 0601-6235 0601-6216 0601-3846 0601-3847 0601-3849 0601-3848
RkJQdWJsaXNoZXIy OTcxOTk3