2022 Drag Specialties FatBook

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com All part numbers in BLUE are new for 2022. SECTION 7 738 See OLDBOOK For Early Model Applications DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 5-6 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE. PART # DESCRIPTION SUG. RETAIL 0929-0015 For 17-21 M-Eight, 99-17 Twin Cam, 00-21 XL/XR (except 21 Sportster S/RH 1250S), 1200 and 00-09 Buell $135.95 DS-194347 For all 91-99 XL and 94-99 Buell (.9035” OD); repl. OEM #18529-89 131.95 DS-194342 For 86-90 XL (.8425” OD); repl. OEM #18523-86 133.95 HYDROSOLID TAPPETS • Performs like a hydraulic tappet up to 5500 rpm, then turns into a solid tappet • When it turns into a solid tappet, it adds approximately three to six more usable horsepower • Prevents hydraulic pump at high rpm • Sold each • Made in the U.S.A. NOTE: Requires the use of adjustable pushrods. DS-194342 DS-194347 0929-0015 PART # DESCRIPTION SUG. RETAIL FOR 91-99 XL, 94-99 BUELL; REPL. OEM #18526-89 DS-194278 Std. (.9035”) $120.95 FOR 86-90 XL; REPL. OEM #18523-86 DS-194107 Std. (.8425”) 115.95 BIG AXLE ™ POWERGLIDE ™ TAPPETS • Micro-finish bore allows a running fit of .0002” • Big Axle ™ rollers are designed around three working parts • The outer wheel/​roller has a 27% greater wall size – less harmonic distortion for better tracking of cam lobe • Pin bearings are decreased in size by 12%, which increases rpm for more precise tracking • Axle size is increased 36% and doubles as the inner race, so the pin bearing and complete roller assembly now rotate around the axle instead of an inner race, eliminating all possible movement in and around the axle • Sold each • Made in the U.S.A. DS-194107 DS-194278 PART # DESCRIPTION SUG. RETAIL 0929-0006 For 03-17 Twin Cam and S&S Evo-style lifters w/ .612” ID tappets $24.95 HYDRAULIC LIFTER LIMITED-TRAVEL SPACERS • Spacers are designed to limit the range of travel of the hydraulic tappet plunger • Helps with starting and high-speed operation by not letting the hydraulic lifter bleed down or collapse • Sold in sets of four • Made in the U.S.A. NOTE: Requires the use of adjustable pushrods, see page 733. PART # DESCRIPTION SUG. RETAIL 0929-0053 For 86-90 XL $113.95 HIGH-QUALITY TAPPET ROLLER KITS • Made from 52100 bearing material • Include 4340 chromoly axles • Sold in a 4-pack PART # DESCRIPTION SUG. RETAIL 0929-0075 For 17-21 FLHT/​FLHR/​FLTRX/​FLTRU/​ FLTRK/​FLHX, 18-21 Softail $65.95 TAPPET CUFFS LIFTER GUIDES • The factory tappet guides are constructed of plastic, which allows tappets to twist under heavy stress • These tappet cuffs capture the tappets without impacting vertical motion to keep them aligned, even in high-rpm situations • Billet aluminum construction with a hard anodized black coating • Easy upgrade when changing tappets or doing a cam change • Made in the U.S.A. NOTE: Due to variances between cam and tappet manufacturers, always check the tappet to tappet cuff clearance. PART # DESCRIPTION SUG. RETAIL 0929-0087 For 06-21 XL (except 21 Sportster S/​RH1250S); repl. OEM #18505-06 $64.95 TAPPET CUFFS FOR XL • Capture the tappets without impacting vertical motion to keep them perfectly aligned, even in high-stress, high rpm situations • Billet aluminum construction • Stronger material eliminates distortion. • Hard-anodized black coating • Sold in pairs • Made in the U.S.A.