2022 Drag Specialties FatBook

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com SECTION 7 All part numbers in BLUE are new for 2022. 731 See OLDBOOK For Early Model Applications DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 5-6 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE. PART # DESCRIPTION SUG. RETAIL FOR 17-21 M-EIGHT 0928-0091 1 Stock replacement length and designed to work with factory base circle camshaft dimensions (works with all stock, SE ® and Feuling ® camshafts) $159.95 0928-0113 1 .040” shorter than stock and designed to work with decked cylinder heads and running thinner head gaskets (works with all Feuling ® stock and SE ® M-Eight camshafts) 169.95 0928-0114 1 .040” longer than stock and designed to work with factory base circle camshaft dimensions (works with all Feuling ® stock and SE ® M-Eight camshafts) 169.95 FOR 99-17 TWIN CAM 0928-0101 Stock replacement length and designed to work with factory base circle camshaft dimensions (works with Feuling ® 525, 543 and 574 cam grinds) 159.95 0928-0102 .030” longer than stock and designed to work with smaller base circle camshafts (works with Feuling ® 594 and 630 cam grinds) 169.95 0928-0116 For use with Feuling ® Short-Travel lifters and designed to work with factory base circle camshaft dimensions (works with Feuling ® 525, 543 and 574 cam grinds) 169.95 0928-0117 For use with Feuling ® Short-Travel lifters and designed to work with smaller base circle camshafts (works with Feuling ® 594 and 630 cam grinds) 169.95 1 Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling ® highly recommends running one-piece pushrods instead of quick-install adjustable pushrods to maintain maximum cam/​valve lift and reduce valve train harmonics and associated hydraulic lifter issues. HP+ ® ONE-PIECE PUSHRODS • Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/​valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues • Fixed length, 4130 chromoly one-piece pushrods with swedged formed ends PART # DESCRIPTION SUG. RETAIL FOR 99-17 TWIN CAM 0928-0009 HP+ ® .120” wall thickness $189.95 PART # DESCRIPTION SUG. RETAIL FOR 99-17 TWIN CAM (CONT) 0928-0010 Race Series ® .145” wall thickness $199.95 HP+ ® AND RACE SERIES ® ADJUSTABLE PUSHRODS • Maintain maximum valve lift • Increased stiffness and column rigidity maximizing valve-train stability, increasing engine rpm horsepower and torque output • Adjustable pushrods are 3 / 8 ”, 4130 chrome moly tube and use a minimal adjustment parameter eliminating flex and loss of valve train-stability problems associated with most adjustable pushrods • Individual length intake and exhaust pushrods keep the adjustment extension to a minimum • Designed to exceed the needs of performance engines using larger lift camshafts and high spring pressures, while maintaining proper and critical oil flow to top end valve gear • For use with hydraulic or solid lifters and street or race engines • HP+ and Race Series pushrods require removal of rocker covers and rocker arm supports, Feuling Quick install rods (PART #0928-0105) can be installed without removing the rocker covers, arms and supports • Feuling HP+ and Race Series pushrods can be used with the factory pushrod tubes • PART #0928-0009 HP+ pushrods have 24 threads per inch adjustment, super strength single jam nut lock system, wall thickness 0.120” • PART #0928-0010 Race Series pushrods have 24 threads per inch with 0.145” wall thickness (recommended when extreme valve-spring pressures are used) • Made in the U.S.A. NOTE: HP+ and Race Series adjustable pushrods can be adjusted 0.225” over stock length to accommodate longer cylinders and smaller base circle camshafts. NOTE: To ease installation on Twin Cam applications use Pushrod Tube Kit PART #s 0928-0016 or DS-193758; not required. NOTE: Requires removal of rocker covers and rocker arm supports for installation. • Heavy-duty 7 / 16 ” diameter tube with a wall thickness of .165” • Heat-treated with a black oxide finish • Made in the U.S.A. NOTE: Requires removal of rocker covers and rocker arms for installation. 0928-0009 0928-0114 0928-0102 0928-0091